Iron shooter
Iron shooter from 3R ORIGINAL DAVOSER
Protection for your sled or toboggan
This protection protects the iron from scratches during transport. The iron contactors are delivered in pairs and fit on all 3R sledges.
Care for sled and toboggan
We recommend drying the sliding surface well after use. You can also preserve or wax the sliding steel for storage before storing the sled. Have the worn sliding surface regrinded or replace it and repair paint damage occasionally.
The toboggan is a piece of sports equipment and with a reasonable riding style and proper care it will give you pleasure for a long time.
- If necessary, grind steel rails in running direction with grain size 60-80.
- The icier the track, the finer the grinding of the rail.
- The inner edge of the rail should be sharp.
- After sanding with steel wool, pull off in running direction (remove sanding residues) and clean from sanding dust with wax remover.
- The structure must be clean in itself.
- The splints should be treated with 3R ORIGINAL DAVOSER wax products.
- After tobogganing, wipe the tracks dry and wax. Unfortunately, most good and fast rails are susceptible to rust.
- Do not expose the toboggan to the blazing sun in the car for long periods of time.
- When mounting the steel rails, ensure 1-2mm toe-in. Front slightly narrower than rear (like the track setting of a car)
The right storage
- Lightly oil or wax rails
- Store in a dry, cool place
- Freestanding or lying Storage
- Never lean against one side or load with objects
- Do not place device near radiators or other heat sources
